Welded Stainless Steel Pipes Tubes
We are bringing forth exclusive range of Welded Stainless Steel Pipe Manufacturers in Mumbai which are widely demanded in chemical industries, oil and natural gas, petrochemical, liquid, agriculture and several other industries. Having experience of more than two decades, we fully understand the requirements of the industry and them with highly reliable solution. Owing to our brilliant quality products, we are counted among the noted Welded Stainless Steel Pipe wholesale exporters, and traders.
Our comprehensive range is manufactured at our factory using premium grade stainless steel alloy. This alloy contains ingredients like chromium, nickel, carbon, manganese and several other metals. The alloy exhibits properties which are quite different from the metals itself. This alloy manifests high tensile strength and provides resistance to corrosion and other environmental factors. Owing to this, our products offer characteristics as durability and reliability.
If you are looking to buy from Welded Pipes and Tubes Manufacturers/ Wholesale Suppliers/ Stockholders/ Stockists/ Exporters/ Dealers, then we are one stop solution for all your needs. With our available stock, we are capable of entertaining bulk requirements of the clients. Owing to our trusted international network, we are capable of fulfilling your needs in stipulated time frame.
Composition of Stainless Steel:View Table
| Classification |
Specification |
Chemical Composition |
other |
| JIS |
AISI |
C |
Si |
Mn |
P |
S |
Ni |
Cr |
Mo |
Cu |
N |
| Martensitic Grades |
SUS403 |
403 |
Max.0.15 |
Max.0.50 |
Max.1.00 |
Max.0.040 |
Max.0.030 |
(1) |
11.50~13.00 |
- |
- |
- |
- |
| SUS410 |
410 |
Max.0.15 |
Max.1.00 |
Max.1.00 |
Max.0.040 |
Max.0.030 |
(1) |
11.50~13.50 |
- |
- |
- |
- |
| SUS410J1 |
- |
0.08~0.18 |
Max.0.60 |
Max.1.00 |
Max.0.040 |
Max.0.030 |
(1) |
11.50~14.00 |
0.30~0.60 |
- |
- |
- |
| SUS410F2 |
- |
Max.0.15 |
Max.1.00 |
Max.1.00 |
Max.0.040 |
Max.0.030 |
(1) |
11.50~13.50 |
- |
- |
- |
Pb 0.05˜0.30 |
| SUS416 |
416 |
Max.0.15 |
Max.1.00 |
Max.1.25 |
Max.0.060 |
Min.0.15 |
(1) |
12.00~14.00 |
(2) |
- |
- |
- |
| SUS420J1 |
420 |
0.16~0.25 |
Max.1.00 |
Max.1.00 |
Max.0.040 |
Max.0.030 |
(1) |
12.00~14.00 |
- |
- |
- |
- |
| SUS420J2 |
420 |
0.26~0.40 |
Max.1.00 |
Max.1.00 |
Max.0.040 |
Max.0.030 |
(1) |
12.00~14.00 |
- |
- |
- |
- |
| SUS420F |
420F |
0.26~0.40 |
Max.1.00 |
Max.1.25 |
Max.0.060 |
Min.0.15 |
(1) |
12.00~14.00 |
(2) |
- |
- |
- |
| SUS420F2 |
- |
0.26~0.40 |
Max.1.00 |
Max.1.00 |
Max.0.040 |
Max.0.030 |
(1) |
12.00~14.00 |
- |
- |
- |
Pb 0.05~0.30 |
| SUS431 |
431 |
Max.0.20 |
Max.1.00 |
Max.1.00 |
Max.0.040 |
Max.0.030 |
1.25~2.50 |
15.00~17.00 |
- |
- |
- |
- |
| SUS440A |
440A |
0.60~0.75 |
Max.1.00 |
Max.1.00 |
Max.0.040 |
Max.0.030 |
(1) |
16.00~18.00 |
(3) |
- |
- |
- |
| SUS440B |
440B |
0.75~0.95 |
Max.1.00 |
Max.1.00 |
Max.0.040 |
Max.0.030 |
(1) |
16.00~18.00 |
(3) |
- |
- |
- |
| SUS440C |
440C |
0.95~1.20 |
Max.1.00 |
Max.1.00 |
Max.0.040 |
Max.0.030 |
(1) |
16.00~18.00 |
(3) |
- |
- |
- |
| SUS440F |
S44020 |
0.95~1.20 |
Max.1.00 |
Max.1.25 |
Max.0.060 |
Min.0.15 |
(1) |
16.00~18.00 |
(3) |
- |
- |
- |
| Ferritic Grades |
SUS405 |
405 |
Max.0.08 |
Max.1.00 |
Max.1.00 |
Max.0.040 |
Max.0.030 |
- |
11.50~14.50 |
- |
- |
- |
Al 0.10~0.30 |
| SUS410L |
- |
Max.0.03 |
Max.1.00 |
Max.1.00 |
Max.0.040 |
Max.0.030 |
- |
11.00~13.50 |
- |
- |
- |
- |
| SUS430 |
430 |
Max.0.12 |
Max.0.75 |
Max.1.00 |
Max.0.040 |
Max.0.030 |
- |
16.00~18.00 |
- |
- |
- |
- |
| SUS430F |
430F |
Max.0.12 |
Max.1.00 |
Max.1.25 |
Max.0.060 |
Min.0.15 |
- |
16.00~18.00 |
(2) |
- |
- |
- |
| SUS434 |
434 |
Max.0.12 |
Max.1.00 |
Max.1.00 |
Max.0.040 |
Max.0.030 |
- |
16.00~18.00 |
0.75~1.25 |
- |
- |
- |
| SUS447J1 |
- |
Max.0.01 |
Max.0.40 |
Max.0.40 |
Max.0.030 |
Max.0.020 |
- |
28.50~32.00 |
1.50~2.50 |
- |
Max.0.015 |
- |
| SUSXM27 |
- |
Max.0.01 |
Max.0.40 |
Max.0.40 |
Max.0.030 |
Max.0.020 |
- |
25.00~27.50 |
0.75~1.50 |
- |
Max.0.015 |
- |
| Austenitic Ferritic Grades |
SUS329J1 |
329 |
Max.0.08 |
Max.1.00 |
Max.1.50 |
Max.0.040 |
Max.0.030 |
3.00~6.00 |
23.00~28.00 |
1.00~3.00 |
- |
- |
- |
| SUS329J3L |
S31803 |
Max.0.03 |
Max.1.00 |
Max.2.00 |
Max.0.040 |
Max.0.030 |
4.50~6.50 |
21.00~24.00 |
2.50~3.50 |
- |
0.08~0.20 |
- |
| SUS329J4L |
S31260 |
Max.0.03 |
Max.1.00 |
Max.1.50 |
Max.0.040 |
Max.0.030 |
5.50~7.50 |
24.00~26.00 |
2.50~3.50 |
- |
0.08~0.30 |
- |
| Austenitic Grades |
SUS201 |
201 |
Max.0.15 |
Max.1.00 |
5.50~7.50 |
Max.0.060 |
Max.0.030 |
3.50~5.50 |
16.00~18.00 |
- |
- |
0.25?? |
- |
| SUS202 |
202 |
Max.0.15 |
Max.1.00 |
7.50~10.00 |
Max.0.060 |
Max.0.030 |
4.00~6.00 |
17.00~19.00 |
- |
- |
Max.0.25 |
- |
| SUS301 |
301 |
Max.0.15 |
Max.1.00 |
Max.2.00 |
Max.0.045 |
Max.0.030 |
6.00~8.00 |
16.00~18.00 |
- |
- |
- |
- |
| SUS302 |
302 |
Max.0.15 |
Max.1.00 |
Max.2.00 |
Max.0.045 |
Max.0.030 |
8.00~10.00 |
17.00~19.00 |
- |
- |
- |
- |
| SUS303 |
303 |
Max.0.15 |
Max.1.00 |
Max.2.00 |
Max.0.200 |
Min.0.15 |
8.00~10.00 |
17.00~19.00 |
(2) |
- |
- |
- |
| SUS303Se |
303Se |
Max.0.15 |
Max.1.00 |
Max.2.00 |
Max.0.200 |
Max.0.060 |
8.00~10.00 |
17.00~19.00 |
- |
- |
- |
Se Min.0.15 |
| SUS303Cu |
- |
Max.0.15 |
Max.1.00 |
Max.3.00 |
Max.0.200 |
Min.0.15 |
8.00~10.00 |
17.00~19.00 |
(2) |
1.50~3.50 |
- |
- |
| SUS304 |
304 |
Max.0.08 |
Max.1.00 |
Max.2.00 |
Max.0.045 |
Max.0.030 |
8.00~10.50 |
18.00~20.00 |
- |
- |
- |
- |
| SUS304L |
304L |
Max.0.03 |
Max.1.00 |
Max.2.00 |
Max.0.045 |
Max.0.030 |
9.00~13.00 |
18.00~20.00 |
- |
- |
- |
- |
| SUS304N1 |
304N |
Max.0.08 |
Max.1.00 |
Max.2.50 |
Max.0.045 |
Max.0.030 |
7.00~10.50 |
18.00~20.00 |
- |
- |
0.10~0.25 |
- |
| SUS304N2 |
- |
Max.0.08 |
Max.1.00 |
Max.2.50 |
Max.0.045 |
Max.0.030 |
7.50~10.50 |
18.00~20.00 |
- |
- |
0.15~0.30 |
Nb Max.0.15 |
| SUS304LN |
304LN |
Max.0.03 |
Max.1.00 |
Max.2.00 |
Max.0.045 |
Max.0.030 |
8.50~11.50 |
17.00~19.00 |
- |
- |
0.12~0.22 |
- |
| SUS304J3 |
- |
Max.0.08 |
Max.1.00 |
Max.2.00 |
Max.0.045 |
Max.0.030 |
8.00~10.50 |
17.00~19.00 |
- |
1.00~3.00 |
- |
- |
| SUS305 |
305 |
Max.0.12 |
Max.1.00 |
Max.2.00 |
Max.0.045 |
Max.0.030 |
10.50~13.00 |
17.00~19.00 |
- |
- |
- |
- |
| SUS309S |
309S |
Max.0.08 |
Max.1.00 |
Max.2.00 |
Max.0.045 |
Max.0.030 |
12.00~15.00 |
22.00~24.00 |
- |
- |
- |
- |
| SUS310S |
310S |
Max.0.08 |
Max.1.50 |
Max.2.00 |
Max.0.045 |
Max.0.030 |
19.00~22.00 |
24.00~26.00 |
- |
- |
- |
- |
| SUS316 |
316 |
Max.0.08 |
Max.1.00 |
Max.2.00 |
Max.0.045 |
Max.0.030 |
10.00~14.00 |
16.00~18.00 |
2.00~3.00 |
- |
- |
- |
| SUS316L |
316L |
Max.0.03 |
Max.1.00 |
Max.2.00 |
Max.0.045 |
Max.0.030 |
12.00~15.00 |
16.00~18.00 |
2.00~3.00 |
- |
- |
- |
| SUS316N |
316N |
Max.0.08 |
Max.1.00 |
Max.2.00 |
Max.0.045 |
Max.0.030 |
10.00~14.00 |
16.00~18.00 |
2.00~3.00 |
- |
0.10~0.22 |
- |
| SUS316LN |
316LN |
Max.0.03 |
Max.1.00 |
Max.2.00 |
Max.0.045 |
Max.0.030 |
10.50~14.50 |
16.50~18.50 |
2.00~3.00 |
- |
0.12~0.22 |
- |
| SUS316Ti |
- |
Max.0.08 |
Max.1.00 |
Max.2.00 |
Max.0.045 |
Max.0.030 |
10.00~14.00 |
16.00~18.00 |
2.00~3.00 |
- |
- |
Ti Min.5xC% |
| SUS316J1 |
- |
Max.0.08 |
Max.1.00 |
Max.2.00 |
Max.0.045 |
Max.0.030 |
10.00~14.00 |
17.00~19.00 |
1.20~2.75 |
1.00~2.50 |
- |
- |
| SUS316J1L |
- |
Max.0.03 |
Max.1.00 |
Max.2.00 |
Max.0.045 |
Max.0.030 |
12.00~16.00 |
17.00~19.00 |
1.20~2.75 |
1.00~2.50 |
- |
- |
| SUS316F |
- |
Max.0.08 |
Max.1.00 |
Max.2.00 |
Max.0.045 |
Min.0.10 |
10.00~14.00 |
16.00~18.00 |
2.00~3.00 |
- |
- |
- |
| SUS317 |
317 |
Max.0.08 |
Max.1.00 |
Max.2.00 |
Max.0.045 |
Max.0.030 |
11.00~15.00 |
18.00~20.00 |
3.00~4.00 |
- |
- |
- |
| SUS317L |
317L |
Max.0.03 |
Max.1.00 |
Max.2.00 |
Max.0.045 |
Max.0.030 |
11.00~15.00 |
18.00~20.00 |
3.00~4.00 |
- |
- |
- |
| SUS317LN |
- |
Max.0.03 |
Max.1.00 |
Max.2.00 |
Max.0.045 |
Max.0.030 |
11.00~15.00 |
18.00~20.00 |
3.00~4.00 |
- |
0.10~0.22 |
- |
| SUS317J1 |
- |
Max.0.04 |
Max.1.00 |
Max.2.50 |
Max.0.045 |
Max.0.030 |
15.00~17.00 |
16.00~19.00 |
4.00~6.00 |
- |
- |
- |
| SUS836L |
- |
Max.0.03 |
Max.1.00 |
Max.2.00 |
Max.0.045 |
Max.0.030 |
24.00~26.00 |
19.00~24.00 |
5.00~7.00 |
- |
Max.0.25 |
- |
| SUS890L |
- |
Max.0.02 |
Max.1.00 |
Max.2.00 |
Max.0.045 |
Max.0.030 |
23.00~28.00 |
19.00~23.00 |
4.00~5.00 |
1.00~2.00 |
- |
- |
| SUS321 |
321 |
Max.0.08 |
Max.1.00 |
Max.2.00 |
Max.0.045 |
Max.0.030 |
9.00~13.00 |
17.00~19.00 |
- |
- |
- |
Ti Min.5xC% |
| SUS347 |
347 |
Max.0.08 |
Max.1.00 |
Max.2.00 |
Max.0.045 |
Max.0.030 |
9.00~13.00 |
17.00~19.00 |
- |
- |
- |
Nb Min.10xC% |
| SUSXM7 |
304Cu |
Max.0.08 |
Max.1.00 |
Max.2.00 |
Max.0.045 |
Max.0.030 |
8.50~10.50 |
17.00~19.00 |
- |
3.00~4.00 |
- |
- |
| SUSXM15J1 |
- |
Max.0.08 |
3.00~5.00 |
Max.2.00 |
Max.0.045 |
Max.0.030 |
11.50~15.00 |
15.00~20.00 |
- |
- |
- |
- |
| Precipitation Hardening Grades |
SUS630 |
S17400 |
Max.0.07 |
Max.1.00 |
Max.1.00 |
Max.0.040 |
Max.0.030 |
3.00~5.00 |
15.00~17.50 |
- |
3.00~5.00 |
- |
Nb 0.15~0.45 |
| SUS631 |
S17700 |
Max.0.09 |
Max.1.00 |
Max.1.00 |
Max.0.040 |
Max.0.030 |
6.50~7.75 |
16.00~18.00 |
- |
- |
- |
Al 0.75~1.50 |
View Table
Technical Specification of our Welded Stainless Steel Pipes Tubes
304 304L stainless steel alloy is manufactured using chromium and nickel. These constituents exhibit brilliant tensile strength and offer resistance to corrosion. This alloy is widely used owing to the fact that it offers ease of fabrication and outstanding formability.
Read More
Enquire Now
If you are looking to buy directly from the 316 316L stainless steel Welded Pipes manufacturers/ wholesale suppliers/ exporters/ dealers/ stockists, then Steel Pipe Sourcing is one stop destination for all your requirements. We are offering our range which is manufactured as per the guidelines of the ASTM/ASME, EURONORM, AFNOR, DIN, etc.
Read More
Enquire Now
We are counted in the list of prominent Stainless Steel Welded Pipes manufacturers/ wholesale suppliers/ exporters/ dealers/ stockists. We are offering comprehensive range which is manufactured in accordance to the international standards of ASTM/ASME, EURONORM, AFNOR, DIN, etc. These are widely used in several industrial applications.
Read More
Enquire Now
Stainless Steel Pipes Supply By Us
ASTM A213/ASME SA213 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
TP304; TP304L; TP304H; TP310S; TP310H; TP316; TP316L; TP316H; TP316Ti; TP321; TP321H; TP347; TP347H
ASTM A312/ASME SA312 Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
TP304; TP304L; TP304H; TP310S; TP310H; TP316; TP316L; TP316H; TP316Ti; TP321; TP321H; TP347; TP347H
ASTM A789/ASME SA789 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
S31500(SAF1805); S31803(SAF2205); S32205(SAF2205); S32750(SAF2507)
DIN 17456 General purpose seamless circular stainless steel tubes
X2CrNi19-11; X2CrNiMo17-12-2; X5CrNi18-10; X6CrNiTi18-10; X6CrNiNb18-10; X6CrNiMoTi17-12-2
DIN 17458 Seamless circular austenitic stainless steel tubes subject to special requirements
X 2 CrNi 19 11; X 2 CrNiMo 17 13 2; X 5 CrNi 18 10; X 6 CrNiTi 18 10; X 6 CrNiNb 18 10; X 6 CrNiMoTi 17 12 2
EN 10216-5 Seamless steel tubes for pressure purposes Part 5: Stainless steel tubes
X2CrNi18-9; X2CrNi19-11; X2CrNiMo17-12-2; X5CrNi18-10; X6CrNiTi18-10; X6CrNiNb18-10; X6CrNiMoTi17-12-2; X2CrNiMoN22-5-3; X1NiCrMoCu25-20-5; X2CrNiMoN25-7-4; X2CrNiMoSi18-5-3
GOST 9940-81 Seamless hot deformed tubes made of corrosion resistant steel
04Ch18N10; 12Ch18N10T; 10Ch17N13M2T; 08Ch18N10T; 08Ch18N10; 12Ch18N12T; 08Ch18N12B; 12Ch18N9; 10Ch23N18; 08Ch18N12T
GOST 9941-81 Seamless cold and warm-deformed tubes made from corrosion-resistant steel
12Ch18N10T; 10Ch17N13M2T; 08Ch18N10T; 04Ch18N10; 08Ch18N10; 12Ch18N12T; 08Ch18N12B; 12Ch18N9; 10Ch23N18; 08Ch18N12T
TU 14-3-460-2003 Seamless steel tubes for boilers and pipelines
12Ch18N12T
GOST 14162-79 Steel Tubes of small sizes (Capillary)
12Ch18N9; 08Ch18N10T; 12Ch18N10T
ISO 9001:2008 Certified Co.
